The Mishimoto MMICP-F2D-08HBK Hot Side Intercooler Pipe & Boot Kit for your 2008-2010 Ford 6.4L Powerstroke are a direct-fit upgrade for your factory components. The factory pipe and boot features numerous restrictive bends and does not stand a chance against the heat and pressure of your high-powered 6.4L; upgrade to the Mishimoto 6.4L intercooler pipe kit for increased reliability, durability, and performance.
The Mishimoto hot-side intercooler pipe is constructed of mandrel-bent aluminum with a polished finish. The engineers at Mishimoto designed this kit to be a two-piece pipe kit, compared to the factory one-piece pipe, allowing for much easier installation and removal. The Mishimoto hot-side intercooler pipe eliminates restrictive bends in the factory pipe, allowing for improvements in airflow, power, and EGTs.
This kit includes Mishimoto Silicone Boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto Silicone Diesel Boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts.
To add even more reliability, this kit includes Mishimoto Constant-Tension T-Bolt Clamps for accurate and consistent holding power. This hot-side pipe and boot kit is the perfect addition to the Mishimoto 6.4L Powerstroke Performance Intercooler and Mishimoto 6.4L Powerstroke Cold-Side Intercooler Pipe and Boot Kit. It is made in the USA and includes the Mishimoto Lifetime Warranty.
- Bolt-On Replacement
- Replaces Restrictive Factory Pipe
- 3" Polished Aluminum Construction
Silicone Boots with DuraCore:
- Boot 1: 3.00 to 3.20
- Boot 2: 3.00
- Boot 3: 3.00
Constant-Tension T-Bolt Clamps:
- (5) 3.25 Constant-Tension T-Bolt Clamps
- (1) 3.75 Constant-Tension T-Bolt Clamp
0810 Ford F-250 w/ 6.4L Powerstroke
0810 Ford F-350 w/ 6.4L Powerstroke
0810 Ford F-450 w/ 6.4L Powerstroke
0810 Ford F-550 w/ 6.4L Powerstroke
Installation Torque Specs
27 in-lbs (3N*M) recommended for all T-Bolt and Constant-Tension T-Bolt Clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).
(2) Aluminum Intercooler Pipes
(3) Silicone Boots with DuraCore Technology
(6) Constant-Tension T-Bolt Clamps
(2) Aluminum Mishimoto "M" Logo Badges
Mishimoto Lifetime Warranty
Mishimoto Performance (MP), warrants all of its products under its 'no questions asked' limited lifetime warranty policy. Regardless of the defect in product, Mishimoto will replace the original product. Warranty claims must be accompanied by the original sales receipt from an authorized dealer.
A trained professional should install all MP products. Any issues with compatibility or installation should be addressed before attempting to install the product.The purchaser's remedy for breach of this limited warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of any part or parts. All products returned for warranty consideration must be returned to MP with all transportation expenses prepaid.
MP shall not be responsible for damages to its products or injury to persons using the products in any manner that would constitute improper operation, including but not limited to: incorrect opening of radiator pressure caps, burst hoses, unintended application or usage not intended by MP, negligence, improper installation, or any other use that may cause damages or injury. MP shall not be responsible for injury or harm to persons or property when caused by persons or vehicles using its products.
Mishimoto, under its no questions asked warranty policy, will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident.
For all warranty claims, please contact Mishimoto.